Transient ShaperTransient Shaper
Level-independent attack and sustain controlSeviyeden bağımsız attack ve sustain kontrolü
Transient Shaper raises or lowers the attack and the sustain of a sound without a threshold. It compares a fast and a slow follower of the signal, so a hit gets the same treatment played softly or hard. Add snap to a snare, tighten a boomy kick or bring up the room tail of a loop.Transient Shaper, bir sesin attack ve sustain kısmını eşik ayarlamadan artırır ya da azaltır. Sinyalin hızlı ve yavaş bir takipçisini karşılaştırdığı için bir vuruş yumuşak da çalınsa sert de çalınsa aynı muameleyi görür. Snare’e snap kat, gürleyen kick’i sıkılaştır ya da bir loop’un oda kuyruğunu öne çıkar.
The store opens soon. You can try every plugin free in your browser today.Mağaza yakında açılıyor. Tüm eklentileri bugün tarayıcında ücretsiz deneyebilirsin.
Also included in Full Band ($500) together with every other plugin and every future update.Full Band ($500) içinde diğer tüm eklentilerle ve gelecekteki her güncellemeyle birlikte gelir.
See Full BandFull Band’i gör
What it doesNe yapar
- Attack and Sustain from -100 % to +100 %, up to ±12 dB of gain, with no threshold and the effect varying by less than 1 dB across a 24 dB range of input levels in our testsAttack ve Sustain -%100 ile +%100 arası, en fazla ±12 dB kazanç; eşik yok ve testlerimizde 24 dB’lik giriş seviyesi aralığında etki 1 dB’den az değişir
- Sustain lift fades out when the signal is far below its recent peak, so noise between hits is not pumped upSinyal son tepesinin çok altındayken sustain artışı devreden çıkar; vuruşlar arasındaki gürültü şişmez
- Speed 0.5x to 2x scales the detector for slower or faster materialSpeed 0,5x-2x, dedektörü yavaş ya da hızlı malzemeye göre ölçekler
- 3-band mode: splits at 60-500 Hz and 1-10 kHz, each band with its own attack and sustain trim3 bant modu: 60-500 Hz ve 1-10 kHz’de bölünür, her banda ayrı attack ve sustain ayarı
- Clip safe soft-limits boosts near full scale; Mix and Output (-24 to +12 dB)Clip safe tam skalaya yakın artışları yumuşak sınırlar; Mix ve Output (-24 ile +12 dB)
- Before/after envelope display and a live gain traceÖnce/sonra zarf ekranı ve canlı kazanç izi
How to use itNasıl kullanılır
- Start from Punch (+attack) or Tighten (-sustain) and loop the part.Punch (+attack) veya Tighten (-sustain) ile başla ve parçayı döngüye al.
- Raise Attack for snap, lower it to soften hits; lower Sustain to dry out a room, raise it to let tails bloom.Snap için Attack’ı artır, vuruşları yumuşatmak için azalt; odayı kurutmak için Sustain’i azalt, kuyrukların açılması için artır.
- For a kick, open 3-band mode: lift the low band’s sustain for boom or the mid band’s attack for click. Keep Clip safe on while boosting.Kick için 3 bant modunu aç: gürleme için alt bandın sustain’ini, tık sesi için orta bandın attack’ını artır. Artırırken Clip safe açık kalsın.
Great forŞunlar için ideal
SpecsTeknik özellikler
- FormatsFormatlar
- VST3 for Windows (64-bit) and free in your browserWindows için VST3 (64 bit) ve tarayıcında ücretsiz
- LatencyGecikme
- None: no lookahead, no added delayYok: lookahead yok, ek gecikme yok
- CPU loadİşlemci yükü
- Very light: about 0.2 % of one CPU core in our 48 kHz benchmark of the browser version (single instance)Çok hafif: 48 kHz tarayıcı sürümünün kıyas testinde (tek örnek) bir işlemci çekirdeğinin yaklaşık %0,2’si
- Sample ratesÖrnekleme hızları
- Tested at 44.1, 48 and 96 kHz44,1, 48 ve 96 kHz’de test edildi
- ChannelsKanallar
- StereoStereo
- ParametersParametreler
- 15 automatable parameters15 otomasyona açık parametre
- PresetsHazır ayarlar
- 26 factory presets26 hazır ayar
Factory presetsHazır ayarlar
26 factory presets, for example26 hazır ayar, örneğin
More like thisBenzer eklentiler



