Dehum + DeclickDehum + Declick
Mains hum remover with narrow notches, plus click repairDar notch’larla şebeke uğultusu giderici ve tık onarımı
Dehum + Declick removes 50 or 60 Hz mains hum and its harmonics with very narrow notch filters, so the music around them stays untouched. The mains frequency can be detected automatically and followed. A second section finds short clicks and pops and rebuilds the damaged samples from the audio on either side.Dehum + Declick, 50 ya da 60 Hz şebeke uğultusunu ve harmoniklerini çok dar notch filtrelerle temizler; çevresindeki müzik olduğu gibi kalır. Şebeke frekansı otomatik bulunup izlenebilir. İkinci bölüm kısa tıkırtı ve patlamaları bulur, bozulan örnekleri iki yanındaki sesten yeniden kurar.
The store opens soon. You can try every plugin free in your browser today.Mağaza yakında açılıyor. Tüm eklentileri bugün tarayıcında ücretsiz deneyebilirsin.
Also included in Full Band ($500) together with every other plugin and every future update.Full Band ($500) içinde diğer tüm eklentilerle ve gelecekteki her güncellemeyle birlikte gelir.
See Full BandFull Band’i gör
What it doesNe yapar
- Mains: Auto (finds 50 or 60 Hz within ±1 Hz and follows it) or a fixed 50 / 60 HzMains: Auto (50 ya da 60 Hz’i ±1 Hz içinde bulur ve izler) ya da sabit 50 / 60 Hz
- 1-8 harmonics, one notch each, plus Fine tune ±1 Hz for hum slightly off nominal1-8 harmonik, her birine ayrı notch; nominal değerden hafif sapan uğultu için ±1 Hz Fine tune
- Depth up to 60 dB, Notch width 0.5-8 Hz; in our test signals the hum and its first three harmonics fell by more than 40 dB while the rest stayed within 1 dB60 dB’e kadar Depth, 0,5-8 Hz Notch width; test sinyallerimizde uğultu ve ilk üç harmonik 40 dB’den fazla azaldı, geri kalan 1 dB içinde kaldı
- Listen removed plays only what the notches take out; the display shows the detected mains frequencyListen removed notch’ların yalnızca çıkardığı sesi dinletir; ekran bulunan şebeke frekansını gösterir
- Click repair finds short impulses (up to 24 samples) and rebuilds them from clean neighboursClick repair kısa darbeleri (24 örneğe kadar) bulur ve temiz komşu örneklerden yeniden kurar
- Click sensitivity sets how readily clicks are caught; a counter shows how many were repairedClick sensitivity tıkların ne kadar kolay yakalanacağını belirler; sayaç kaç tıkın onarıldığını gösterir
How to use itNasıl kullanılır
- Put Dehum + Declick at the start of the chain, leave Mains on Auto (or pick 50 / 60 Hz) and raise Harmonics until the buzz stops.Dehum + Declick’i zincirin başına ekle, Mains’i Auto bırak (ya da 50 / 60 Hz seç) ve vızıltı kesilene kadar Harmonics’i yükselt.
- Switch on Listen removed: you should hear only hum. If you hear music, narrow Notch width or lower Depth.Listen removed’ı aç: yalnızca uğultuyu duymalısın. Müziği duyuyorsan Notch width’i daralt ya da Depth’i düşür.
- For crackle, raise Click repair and set Click sensitivity so the counter reacts to clicks, not music.Çıtırtı için Click repair’i artır, sayaç müziğe değil tıklara tepki verecek şekilde Click sensitivity’yi ayarla.
Great forŞunlar için ideal
SpecsTeknik özellikler
- FormatsFormatlar
- VST3 for Windows (64-bit) and free in your browserWindows için VST3 (64 bit) ve tarayıcında ücretsiz
- LatencyGecikme
- 40 samples (0.8 ms at 48 kHz), reported to your DAW for automatic compensation40 örnek (48 kHz’de 0.8 ms), otomatik telafi için DAW’a bildirilir
- CPU loadİşlemci yükü
- Light: about 0.6 % of one CPU core in our benchmark of the browser version (48 kHz)Hafif: tarayıcı sürümünün kıyas testinde bir işlemci çekirdeğinin yaklaşık % 0,6’sı (48 kHz)
- Sample ratesÖrnekleme hızları
- Tested at 44.1, 48 and 96 kHz44,1, 48 ve 96 kHz’de test edildi
- ChannelsKanallar
- StereoStereo
- ParametersParametreler
- 8 automatable parameters8 otomasyona açık parametre
- PresetsHazır ayarlar
- 6 factory presets6 hazır ayar
Factory presetsHazır ayarlar
6 factory presets, for example6 hazır ayar, örneğin
More like thisBenzer eklentiler



