M/S MatrixM/S Matrix
Mid/Side encoder, decoder and processor with solo and cutsSolo ve kesme filtreli Mid/Side kodlayıcı, çözücü ve işlemci
M/S Matrix splits a stereo signal into Mid (what both channels share) and Side (what differs), lets you process each separately and puts them back together. Use it as an encoder or decoder around other plugins, or in Process mode as a ready-made tool with gain, polarity, filters and solo.M/S Matrix stereo sinyali Mid (iki kanalın ortak yanı) ve Side (farklı yanı) olarak ayırır, her birini ayrı işlemene izin verir ve yeniden birleştirir. Diğer eklentilerin etrafında kodlayıcı ya da çözücü olarak, ya da Process modunda kazanç, polarite, filtre ve solo içeren hazır bir araç olarak kullanabilirsin.
The store opens soon. You can try every plugin free in your browser today.Mağaza yakında açılıyor. Tüm eklentileri bugün tarayıcında ücretsiz deneyebilirsin.
Also included in Full Band ($500) together with every other plugin and every future update.Full Band ($500) içinde diğer tüm eklentilerle ve gelecekteki her güncellemeyle birlikte gelir.
See Full BandFull Band’i gör
What it doesNe yapar
- Encode (L/R to Mid/Side), Decode (back to L/R) and Process (encode, process, decode back in one)Encode (L/R’den Mid/Side’a), Decode (tekrar L/R’ye) ve Process (kodla, işle, geri çöz; hepsi tek adımda)
- Mid and Side gain from -60 dB (mute) to +12 dB, with separate polarity flipsMid ve Side kazancı -60 dB’den (sessiz) +12 dB’e, ayrı polarite çevirmeleriyle
- Solo Mid or Solo Side plays that half on both channelsSolo Mid veya Solo Side o yarıyı iki kanaldan birden verir
- Low cut 20 Hz–1 kHz and high cut 1–20 kHz, 24 dB per octave, on Mid + Side, Mid only or Side onlyOktav başına 24 dB, 20 Hz–1 kHz low cut ve 1–20 kHz high cut; Mid + Side, yalnızca Mid ya da yalnızca Side üzerinde
- Mono bass in one step: cut the Side below 120 HzTek adımda mono bas: Side’ı 120 Hz altında kes
- Scaling: Half (M = (L+R)/2) or Ortho (1/√2, energy preserving)Scaling: Half (M = (L+R)/2) veya Ortho (1/√2, enerjiyi korur)
- Exactly reversible: encode then decode matches the original below -130 dB; Corr and level read-outsTam tersinir: encode sonra decode, orijinalle -130 dB’nin altında eşleşir; Corr ve seviye göstergeleri
How to use itNasıl kullanılır
- In Process mode, raise Side by 1–2 dB to widen or lower it to focus the mix; Mid lifts or reduces the centre.Process modunda, genişletmek için Side’ı 1–2 dB yükselt ya da miksi odaklamak için düşür; Mid merkezi öne alır veya geri çeker.
- Set the low cut to 120 Hz with “Cuts act on” on Side to make the low end mono.Low cut’ı 120 Hz’e getirip “Cuts act on” ayarını Side yap; alt frekanslar mono olur.
- Press Solo Side to hear what the stereo information contains; Corr shows left/right correlation.Solo Side’a basıp stereo bilginin neyi içerdiğini duy; Corr sol/sağ korelasyonunu gösterir.
- To process Mid and Side with other plugins, put one M/S Matrix in Encode mode before them and another in Decode mode after.Mid ve Side’ı başka eklentilerle işlemek için onlardan önce Encode modunda, sonra Decode modunda bir M/S Matrix koy.
Great forŞunlar için ideal
SpecsTeknik özellikler
- FormatsFormatlar
- VST3 for Windows (64-bit) and free in your browserWindows için VST3 (64 bit) ve tarayıcında ücretsiz
- LatencyGecikme
- None: no added delay at default settingsYok: varsayılan ayarlarda ek gecikme yok
- CPU loadİşlemci yükü
- Very light: about 0.1 % of one CPU core in our benchmark of the browser version (48 kHz)Çok hafif: tarayıcı sürümünün kıyas testinde (48 kHz) bir işlemci çekirdeğinin yaklaşık % 0,1 kadarını kullanır
- Sample ratesÖrnekleme hızları
- Tested at 44.1, 48 and 96 kHz44,1, 48 ve 96 kHz’de test edildi
- ChannelsKanallar
- StereoStereo
- ParametersParametreler
- 10 automatable parameters10 otomasyona açık parametre
- PresetsHazır ayarlar
- 8 factory presets8 hazır ayar
Factory presetsHazır ayarlar
8 factory presets, for example8 hazır ayar, örneğin
More like thisBenzer eklentiler



