Stereo ImagerStereo Imager
4-band stereo width, mono bass, correlation meter, vectorscope4 bantlı stereo genişlik, mono bas, korelasyon ölçer, vektörskop
A stereo imager that works on the mid/side signal: a global Width control, separate widths for four frequency bands, and mid and side gain. Bass mono keeps the low end centred, and Safe width pulls the width back when the correlation gets too low. A vectorscope and a correlation meter show what is happening.Mid/side sinyalinde çalışan bir stereo imager: genel Width kontrolü, dört frekans bandı için ayrı genişlikler ve mid ile side kazancı. Bass mono alt frekansları ortada tutar; Safe width ise korelasyon fazla düştüğünde genişliği geri çeker. Vektörskop ve korelasyon ölçer neler olduğunu gösterir.
The store opens soon. You can try every plugin free in your browser today.Mağaza yakında açılıyor. Tüm eklentileri bugün tarayıcında ücretsiz deneyebilirsin.
Also included in Full Band ($500) together with every other plugin and every future update.Full Band ($500) içinde diğer tüm eklentilerle ve gelecekteki her güncellemeyle birlikte gelir.
See Full BandFull Band’i gör
What it doesNe yapar
- Global Width 0-200 %, Mid gain and Side gain (-12 to +12 dB) and Balance; neutral settings leave the audio unchangedGenel Width %0-%200, Mid gain ve Side gain (-12 ile +12 dB) ve Balance; nötr ayarlarda ses değişmeden geçer
- Four bands with draggable crossovers (40-500 Hz, 300-4000 Hz, 2-16 kHz) and a width control eachSürüklenebilir crossover’lı dört bant (40-500 Hz, 300-4000 Hz, 2-16 kHz) ve her birine ayrı genişlik
- Phase-aligned 24 dB/oct Linkwitz-Riley crossovers; each band is coloured by its own correlationFazı hizalı 24 dB/oct Linkwitz-Riley crossover’lar; her bant kendi korelasyonuna göre renklenir
- Bass mono below 20-500 Hz with a 12 or 24 dB/oct slope20-500 Hz altı için Bass mono, 12 ya da 24 dB/oct eğimli
- Safe width guard (threshold -0.5 to +0.9) that only ever reduces the widthGenişliği yalnızca azaltan Safe width koruması (eşik -0,5 ile +0,9)
- Mono check switch, vectorscope, correlation meter and peak readouts; zero latencyMono check anahtarı, vektörskop, korelasyon ölçer ve tepe göstergeleri; sıfır gecikme
How to use itNasıl kullanılır
- Insert it late in the chain, on the master or a bus, and watch the correlation meter.Zincirin sonuna doğru, master kanalına ya da bir bus’a ekle ve korelasyon ölçeri izle.
- Turn on Bass mono and set Mono below to about 100-150 Hz.Bass mono’yu aç ve Mono below’u yaklaşık 100-150 Hz’e ayarla.
- Raise Width gently, or open only the highs with the band widths in Advanced.Width’i yavaşça yükselt; ya da Advanced’deki bant genişlikleriyle yalnızca tizleri aç.
- Switch on Safe width so the guard pulls the correlation back up toward your threshold.Safe width’i açarak korumanın korelasyonu eşiğine doğru yukarı çekmesini sağla.
- Use Mono check to hear what a mono playback system will play.Mono sistemde ne çalacağını duymak için Mono check’i kullan.
Great forŞunlar için ideal
SpecsTeknik özellikler
- FormatsFormatlar
- VST3 for Windows (64-bit) and free in your browserWindows için VST3 (64 bit) ve tarayıcında ücretsiz
- LatencyGecikme
- None: no added delayYok: ek gecikme yok
- OversamplingAşırı örnekleme
- None: runs at the host sample rateYok: host örnekleme hızında çalışır
- CPU loadİşlemci yükü
- Very light: about 0.8 % of one CPU core in our 48 kHz benchmark of the browser version (single instance)Çok hafif: 48 kHz tarayıcı sürümünün kıyas testinde (tek örnek) bir işlemci çekirdeğinin yaklaşık %0,8’i
- Sample ratesÖrnekleme hızları
- Tested at 44.1, 48 and 96 kHz44,1, 48 ve 96 kHz’de test edildi
- ChannelsKanallar
- StereoStereo
- ParametersParametreler
- 17 automatable parameters17 otomasyona açık parametre
- PresetsHazır ayarlar
- 31 factory presets31 hazır ayar
Factory presetsHazır ayarlar
31 factory presets, for example31 hazır ayar, örneğin
More like thisBenzer eklentiler



